Desperate for more firepower on the front, it is decided to convert many naval guns and turrets not in use into self-propelled weapons. This eventually leads to the Mammut(Mammoth) and the Flackpanzer Donnerhann (Thunderclap). These limited-production models of the Tiger series were ultimately upgraded to the Eisenmammuth (Iron Mammoth) with the Tiger II chassis. If you would like to learn more about the history, I have included a file.

These are experimental, so please let me know if anything is incorrect. Additionally, the flak block for the 100.5 cm flak guns is designed to be inserted after the weapon has been placed into the rotating hull. For the basic turret, place the gun down on the round part and then put the turret on top. May need super glue to construct. Please review Chupach's files to learn more about the assembly process. The Mammut requires the bottom piece and 88 guns, while Donnerhann needs the 10.5 cm guns and the flak block piece.

The turrets can be placed on any chassis in the pack, and the Tiger chassis can still be used with its original Tiger tank turrets.
Shout out to Julian Silvestri for his consultation, as well as M Bergman, Wayne, TigerAce1945, Chupach, and Jerry Flames for their excellent model work.
Thank you, guys. I hope you enjoy it.

Dremel Digilab

3D45

Yes

Yes

0.1 to 0.2

10% but can be 5% higher or lower

Is 1-100 but can be scaled by taking the original scale divided by the wanted scale, before multiplying it by 100 and putting it into the slicer. I would suggest 45 mm/s to 60mm/s, especially for Donnerhann. It can print at 60mm/s for Mammut, though.