I simple magnetic wool holder to help with knitting or crochet

Anycubic

Kobra 2

No

Yes

.2mm

15%

Print the spindle itself with at least 30% infill.
To print the hood, I stood it upright, and used a 5 mm brim to hold it in place.

You will also need 4 10mm diameter, 2.5mm thickness, magnets, and one M2 self tapping screw (about 7 mm long) to connect the spindle holder.

Glue 2 magnets in each of the spindle and spindle holder, ensuring that they have the correct pole directions.