My latest 3D printed creation. I have several of these tall standing lamps and it feels like they're all broken in one way or another. So... wall mount that bitch.

Hardware needed:
2x 1-1/4" drywall screws
2x 20mm M4 socket head cap screws
2x M4 washers
2x M4 nuts

The mount prints in two pieces. I used superglue and two regular old drywall screws from the top and from the back to hold them together. Use two M4 20mm socket head cap screws with nuts and washers on the other side to tighten the lamp pole.