Not the most cost/time effective use of my life, but I lost the mount to my shiny metal 3M hook, finally got adhesive strips, and I really wanted to mount the hook. Right meow.

This is a replacement part for the plastic piece (shown next to the printed version -- 2nd pic) that connects the adhesive strip to the hook. Would it be cheaper to just buy one? Maybe. Do they sell spare ones of these in the store? Quite possibly. But you have a 3D printer, I've already wasted my time designing this, so why not spawn one in a mere 30 mins with a negligible amount of filament!

FFCreat0r

Yes

Yes

150 micron

90%

Print with 1 shell, 90% infill, and whatever resolution, I used .15mm. Raft and supports required if printed in recommended orientation (see MakerWare pic). Managed to get away with PLA though!

Remove rafts and supports. Took me <5 mins with my Kershaw 1985ST knife and trusty Leatherman needle nose multi-tool.

Measured with caliper, then modeled in ~30-45 mins. I learned how to use datum planes and splines in NX, so I guess it wasn't a complete waste of time! :D

If you get some use out of this, feel free to show me I saved you some time! Though I don't know if this type of hook is even made anymore. lulz