A mechanical toy that dispenses marbles when a handle is turned

RepRap

No

No

0.2mm layers

35%

All components are already oriented in the optimal manner for printing. The crankshaft and pin would benefit from the use of a brim. The base requires supports. All other components should be printed without brim or supports.

Assembly requires six #6 x 3/4" (or metric equivalent) countersink head sheet metal screws. If bed heat fails to prevent warping of the base it is tall enough to allow the bottom to be sanded flat afterwards. Some foam, preferably self-adhesive, can be attached to the inside of the cover to secure the marbles for transport.

This was entirely designed in Autodesk Fusion 360. Take a look at the following video to see how mechanical linkages can be tested and animated under simulation.