Dragon into fire environment
StripedBobbin
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2026-07-01 10:08:33
0
0
000Описание
Теги
Источник модели
Отзывы(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm
Filaments Used: (* = Owned)
#000000 PLA Smart Recycled Black Transmission Distance: 0.5
#ff0000 PLA Smart Recycled Red Transmission Distance: 4.4
#f97f1e PLA Smart Recycled Orange Transmission Distance: 5.7
#e6cc22 PLA Smart Recycled Yellow Transmission Distance: 9.3
#ffffff PLA Smart Recycled White Transmission Distance: 5.7
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #9 (0.8mm) swap to Orange
At layer #11 (0.96mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.
The Model is 160x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm
Filaments Used: (* = Owned)
#000000 PLA Smart Recycled Black Transmission Distance: 0.5
#ff0000 PLA Smart Recycled Red Transmission Distance: 4.4
#f97f1e PLA Smart Recycled Orange Transmission Distance: 5.7
#e6cc22 PLA Smart Recycled Yellow Transmission Distance: 9.3
#ffffff PLA Smart Recycled White Transmission Distance: 5.7
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #9 (0.8mm) swap to Orange
At layer #11 (0.96mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.
Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY