Wanted Chopper One Piece
Aubrey Quinn98
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2026-09-02 01:45:17
0
0
000Описание
Теги
Источник модели
Отзывы(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 141.4x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 1.84mm
Filaments Used:
#000000 PLA Smart Recycled Black Transmission Distance: 0.5
#7b4b2a PLA smartfil marron Transmission Distance: 5
#ff0000 PLA Smart Recycled Red Transmission Distance: 4.4
#e6cc22 PLA Smart Recycled Yellow Transmission Distance: 9.3
#ffffff PLA Smart Recycled White Transmission Distance: 5.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to marron
At layer #13 (1.12mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.
The Model is 141.4x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 1.84mm
Filaments Used:
#000000 PLA Smart Recycled Black Transmission Distance: 0.5
#7b4b2a PLA smartfil marron Transmission Distance: 5
#ff0000 PLA Smart Recycled Red Transmission Distance: 4.4
#e6cc22 PLA Smart Recycled Yellow Transmission Distance: 9.3
#ffffff PLA Smart Recycled White Transmission Distance: 5.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to marron
At layer #13 (1.12mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to White for the rest.
Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY