Remix of the deburring tool holder by @PaulFirschin_1114995 to fit multiboard push holes as a push fit.

Printed in pla+, 0.2mm layer height, 3 walls, 20% infill. Supports highly recommended for the middle and top variant!

Made 3 variants:

• one with the peg in the middle (as pictured)
• one with the peg at the bottom
• one with the peg at the top

Logo didn't really come out nicely so i cut it off with a hobby knife.  You might have better results with the logo if you print at 0.12mm and/or a smaller nozzle (picture is printed with a 0.4mm nozzle).

If anyone wants a model without the logo, let me know and i'll upload it.

Remix of: https://www.printables.com/model/694746/remixes