I won a Dremel 3000 at a work function and it is finally going to come in handy. This is the resulting Dremel adapter for my CNC I designed so I didn't have to buy a 1/8" collect for the router. I used the CNC to make this however a 3D print would have worked just as well. I am uploading the G-code along with a model and .STL file. The stock size I used was 1" x 2-7/8" x 9" ( to zero in x I drew two lines 132mm apart on center). The stock is so long so I could easily clamp down on either side. Oh, I used a 1/4" cutter.