Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.96mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #000000 PLA BambuLab Basic Black  Transmission Distance: 1.5
    #fb0a09 PLA Creality Hyper Red  Transmission Distance: 3.7
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 3.6
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Turquoise
    At layer #19 (1.6mm) swap to Black
    At layer #21 (1.76mm) swap to Red
    At layer #24 (2mm) swap to Black
    At layer #26 (2.16mm) swap to Yellow
    At layer #31 (2.56mm) swap to White for the rest.

POST UR MAKINGS LOVE  TO SEE THEM!!!