I have been enjoying hueforges for a while now, and I feel like a bunch of people are doing cool vibrant color stuff, I might as well go a different direction and try to add something. Note: the pickguard shown in the photo is only because I need an actual model upload for makerworld, the actual print is square.

Project: get_ya_some.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.9mm and the Actual Depth is 2.8mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Jessie Premium PS Red Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Jessie Premium Beige 500 Transmission Distance: 1
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to PS Red
At layer #22 (1.84mm) swap to Yellow
At layer #27 (2.24mm) swap to Beige 500 for the rest.