ring
print44base
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
1
0
0
Опубликовано:2025-11-26 01:35:16
0
0
100Описание
Теги
Источник модели
Отзывы(0)
Silver Band: Represents purity and timeless elegance. Smooth, polished finish for comfort and durability.
Gold Capsule: A protective, ornamental housing for the gemstone. Designed as a hollow or semi‑enclosed structure that cradles the gem securely.
Red Gem: Symbolizes passion and vitality. The capsule highlights the gem by contrasting gold against silver.
🛠 Structural Features
Band:
Width: ~3 mm for balance between strength and comfort.
Thickness: ~2.5 mm, slightly domed outer surface.
Ergonomic inner curve for daily wear.
Capsule Setting:
Cylindrical or oval capsule mounted at the top of the band.
Capsule walls ~1 mm thick, with an opening or prongs to showcase the gem.
Designed to hold a round‑cut or oval red gem (5–7 mm diameter).
Integration: Capsule fused seamlessly into the band to avoid weak joints.
⚙️ Print Settings
🖨 Printer & Material
Silver Band Simulation:
Use metallic PLA or resin for prototyping.
For final production, print in castable resin → then cast in sterling silver.
Gold Capsule Simulation:
Print separately in gold‑colored resin/filament or cast in gold alloy.
Alternatively, dual‑extrusion printers can print silver and gold filaments together.
Gem: Insert manually after printing; design tolerances allow snap‑fit or adhesive bonding.
📐 Print Parameters
Layer Height: 0.05–0.1 mm → ensures smooth curves and fine detailing.
Infill: 20–30% for strength without excess weight.
Supports: Required under capsule overhangs; use easy‑removable supports at ~60° angles.
Shells/Perimeters: 3–4 walls for durability.
Build Orientation: Print ring flat on its side to minimize layer stress on the band.
🔧 Post‑Processing
Sand and polish to remove layer lines.
Electroplate or cast in silver and gold for authentic finish.
Secure gem with prongs or adhesive depending on design tolerance.
Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC-BY