While the original was a simple square block, I updated the design with a slightly more modern shape. The core functionality and nostalgic feel are still there, but with a cleaner, more contemporary look.

The sliding mechanism works best with a countersunk bolt. I didn’t have one available when I made the prototype and ended up using a flat one, but I recommend using a countersunk version if possible for smoother operation.

Since printing the version shown in the photos, I also made a few small improvements to the model. Most notably, I slightly increased the internal storage space by reducing the wall thickness, while still keeping the case strong.

A M4 heat insert into the base and a M4 countersunk screw is recommended for assembly

Printer Type: FDM/FFF

Material: PLA or PETG (PLA for ease of print, PETG for extra durability)

Layer Height: 0.2 mm

Infill: 15–20% (Grid or Gyroid recommended)

Perimeters/Walls:  2-3 walls should be enough

Supports: Not required (if oriented correctly)