Universal Power Strip Mount / Desk Organizer

A simple, sturdy, and highly functional mounting solution to get your power strips off the floor and eliminate cable clutter under or on your desk.

As shown in Screenshot 2026-06-30 202845.png, the system consists of two distinct pieces:

1. Bottom Bracket: Features an integrated bottom lip/support shelf to securely hold the weight of the power strip and prevent it from sliding down.

2. Top Bracket: A guiding sleeve that keeps the power strip perfectly aligned and prevents it from tipping forward.

Both brackets include countersunk screw holes for a clean, flush mounting experience on walls, desks, or wooden furniture.

Features

• Clean Cable Management: Keeps your workspace organized and vacuum-friendly.

• Secure Two-Part Design: Combines a load-bearing bottom support with a stabilizing top guide.

• Easy Installation: Pre-designed with countersunk holes for standard wood screws.

Print Settings

Since plugging and unplugging devices applies mechanical stress, a slightly sturdier print profile is recommended.

• Material: PLA or PETG (PETG is preferred for extra durability and slight flexibility)

• Infill: 20% – 30% (Gyroid or Grid for optimal strength)

• Walls/Perimeters: 3 – 4 perimeters

• Layer Height: 0.2 mm or 0.28 mm

• Supports: Not required if you print the parts laying flat on their backside.

Installation Tips

1. Measure the width of your power strip to ensure a snug fit within the bracket arms.

2. Mount the bottom bracket (the one with the support lip) first using two countersunk screws.

3. Slide your power strip into place, align the top bracket over it, and screw it down securely.

If you find this model useful, please leave a like and post your makes!