Lady Time - HueForge
Chester Gonzalez
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2025-12-17 13:50:55
0
0
000Описание
Теги
Источник модели
Отзывы(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 104.25x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.99998mm
Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Skin
At layer #19 (1.6mm) swap to White for the rest.
Scaling Instructions
Resize as needed, but remember to reset the Z-axis to 100% before printing .
The .3mf file with black picture is with PAUSE, inserted for manual change of the filament.
The .3mf file with green picture is with auto filament change, for the CFS.
Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY-SA