Venus SW-3B protective case
BareArch
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2025-03-16 19:55:15
0
0
000Описание
Источник модели
Отзывы(0)
Summary
Venus SW-3B protective case
By EA1FXC Ruben
Print Settings
Printer Brand:
Kingroon
Printer:
Kingroon KP3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament Material:
Tough PLA
Post-Printing
Use 5mm thick adhesive rubber 25x25mm (x4) and 8x40mm (x2) for the side protections where the SW-3B fits.
Use 5mm thick, 18mm diameter round adhesive tape (x5) for the tabs on the lid that press down on the SW-3B to keep it in place once the case is closed. Note that one of them needs to have a piece cut off.
Use a 60mm diameter and 8mm wide rubber band to keep the box closed.
- Use 5mm thick adhesive rubber 25x25mm (x4) and 8x40mm (x2) for the side protections where the SW-3B fits.
- Use 5mm thick, 18mm diameter round adhesive tape (x5) for the tabs on the lid that press down on the SW-3B to keep it in place once the case is closed. Note that one of them needs to have a piece cut off.
- Use a 60mm diameter and 8mm wide rubber band to keep the box closed.
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY-SA