Project: taiga1.hfp
Print with a 100% fill rate, a layer height of 0.08mm, and a base layer height of 0.16mm.

The model size is 170x127.5mm.
You can use a higher layer height for printing at a minimum depth of 0.48 mm or less
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
PLA PolyLite is black, and its transmission distance is 0.3 meters.
Bambu Lab PLA Basic Brown, transmission distance: 2
Bambu Lab PLA Basic Beige, transmission distance: 8
Bambu Lab PLA Basic Orange, transmission distance: 7
Bambu Lab PLA Basic Ivory White, transmission distance: 5
This printer uses five unique consumables

Replacement instructions:
Start with black
Switch to brown at the 8th layer
Switch to beige at the 15th layer
Switch to orange at the 21st layer
Switch to jade white at the 25th layer