Recommended printing settings

Printing type:
FDM (filament)

Layer Height:
0.16mm to 0.20mm (the best balance between quality and time)

Wall Line Count:
2 to 3 walls

Top floor/bottom floor:
4 to 5 floors

Fill (Infill):
10% to 20% (grid or gyroscope)

Temperature:
PLA: 200°C / Platform: 60°C
PETG: 230°C / Platform: 70–80°C
ABS: 240°C / Platform: 90–100°C

Printing speed:
50–60 millimeters per second

Support:
When placing the clock motor, its lower part needs to be supported

Suggested directions:
The flat bottom is supported on the printing platform to achieve a better front-facing effect.