Electronic components box
gregory_longo
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2024-01-20 21:12:01
0
0
000Описание
Источник модели
Отзывы(0)
Summary
This is a simple box for electronic components. 1U box is designed to hold generic SMD resistor/capacitor paper strip.
Make sure your printer is calibrated to print parts with tight fit with a 0.2mm gap and loose fit with 0.5mm gap. If you can, it's better if you position z seam at any dovetail corner.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
0%
Notes:
0.4 mm nozzle, 1 wall, 5 top and 5 bottom layers
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY-SA