AI Dot camera stand
Orivalo22
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2025-09-03 16:28:32
0
0
000Описание
Теги
Источник модели
Отзывы(0)
Этот контент был автоматически переведен. Показать оригинал
Overview:
I installed an AI Dot camera next to my CNC and mounted it above and behind the machine. This wasn't ideal for fourth-axis work, as the spindle would always block the view. I created this bracket so I could move the camera to different viewing angles based on the project. I used screws to mount one on the top and back of the machine, and the other was attached to the MASSO controller using double-sided tape. I could simply remove the camera from one bracket and slide it into another one.
It's installed tightly, so the camera won't slide out on its own.
Print:
It can be printed with almost any material, but I only used PLA. If you print in the direction shown, you might not need support, but I still added support to the sharp corners at the bottom. It's very small and adds a bit of stability.
Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY-SA