I've printed several combinations of tool holsters for my Maker Select Plus, but none ever held everything I needed, so I decided to design my own.

Inspirations:

https://www.thingiverse.com/thing:2985356 https://www.thingiverse.com/thing:1627237

Print Settings

Printer Brand:

Monoprice

Printer:

Rafts:

Supports:

Infill:

Filament: Inland PLA Black

Notes:

Post-Printing =============

There were only a few rough spots on this iteration; primarily the braces around the narrow spatula printed unevenly, requiring a little filing to get everything in shape.

How I Designed This

***First iteration:** Intentionally thin, testing widths and diameters, space for multiple tweezers. ***Second iteration:** Thicker base, reduced pegs, Triangle for snips, hook for scraper, allen wrench holes relocated and resized, needle holes resized, braces for thin spatula added. Latch gap narrowed, latch reshaped. ***Third iteration:** Scraper hook elongated, dual pegs for knife holder., snips post shortened. Latch gap widened. ***Fourth iteration:** Hook removed from scraper completely. Allen wrenches relocated and grooves added, caliper hole widened and relocated. latch arm shortened, latch reshaped. ***Fifth iteration:** Scraper pin relocated to end and narrowed, extra pin removed completely, marker hole added, screwdriver and pencil holes relocated, caliper rotated and relocated, needle holes relocated, hooks added to knife pins and scraper pin. Fillet added to allen wrench holes.

Category: 3D Printer Parts