Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.88mm

Filaments Used:

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#9b8979 PLA Jessie Premium Tan 64 Transmission Distance: 1

#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3

#000000 PLA BambuLab Basic Black Transmission Distance: 1.5

#c00d1e PLA BambuLab Basic Red Transmission Distance: 5.1

#ff7713 PLA+ Esun Orange Transmission Distance: 5

#fce300 PLA BambuLab Basic Yellow Transmission Distance: 2.8

#e11021 PLA Copymaster 3D Red Transmission Distance: 4

This print uses 8 unique filaments

Swap Instructions:

Start with Black

At layer #11 (0.96mm) swap to Tan 64

At layer #12 (1.04mm) swap to Blue Gray

At layer #22 (1.84mm) swap to Black

At layer #25 (2.08mm) swap to Red

At layer #28 (2.32mm) swap to Orange

At layer #30 (2.48mm) swap to Yellow

At layer #31 (2.56mm) swap to Red

At layer #32 (2.64mm) swap to Yellow for the rest.