This thing by Davross was redrawn so that it could be customized, when needed, in Autodesk Fusion 360. This switch provides an access alternative to a person with disabilities to control a connected toy or device.

MakerBot

MakerBot Replicator (5th Generation)

Yes

No

100-micron

10%

Post-Printing
12mm switch options
• Omron BSF-5051, https://www.digikey.com/short/c7znhdh4
• Omron B3F-4055, https://www.digikey.com/short/pw5q0f
• Omron B3F-5050, https://www.digikey.com/short/pw5q1z
• 12mm tactile switch button with plunger top, https://a.co/d/2OTgUFU

Cable options
• Dual-condcutor 22 or 24 AWG stranded wire and 3.5mm headphone plug
• 22/2 AWG cable (or two 22 AWG stranded wires), https://a.co/d/0dmGfqf
• 3.5mm mono cable assembly, https://www.digikey.com/short/phpc2t
• 3.5mm headphone plug (male), mono, https://a.co/d/4YOEZUZ

Pivot
• M3 x 0.5mm x 20 mm pan head machine screw, https://www.boltdepot.com/Product-Details.aspx?product=6836
• M3 x 0.5mm stainless steel nut, https://www.boltdepot.com/Product-Details.aspx?product=4773
• 2.5mm x 0.45mm x 20mm pan head machine screw, https://www.boltdepot.com/Product-Details.aspx?product=17863
• 2.5mm x 0.45mm zinc-plated steel nut, https://www.boltdepot.com/Product-Details.aspx?product=18058

Optional Mounting to a Base
• M3 x 0.5mm countersunk screws, https://www.boltdepot.com/Metric_machine_screws_Phillips_flat_head_Stainless_steel_18-8_(A-2)_3mm_x_0.5mm.aspx