I didn't like the bulky bracket that came with the webcam so i removed it and made my second ever print using Tinkercad.

To fit this to your webcam:
Remove the M3 nut and bolt and use it to fit the Camera with this bracket.

I used this Nut and Bolt to pass through my bracket and Webcam mount.
https://cdn.thingiverse.com/assets/ab/33/cb/e6/d7/Bolt_M6_40.stl

Creality

Ender 3

No

No

.2

30%

This fits a generic Webcam available on eBay
https://www.ebay.com.au/itm/384350522801
Many others look the same and would probably work.

Remove the M3 nut and bolt and replace the black mount clip with this bracket.

I used this Nut and Bolt to pass my bracket and Webcam mount
https://cdn.thingiverse.com/assets/ab/33/cb/e6/d7/Bolt_M6_40.stl

My first version was designed before i realised you could create holes in tinkercad.....
There were a few prior revisions to allow for re-use pf the M3 nut and bolt that it came with as I didn't have a long enough and printing one was to weak. I also created an indent for the m3 so it fists nice.