Another, another T096 case.... The T1096-E

Trying to make the smallest, most functional case. All in one, nice and skinny. 

These are all in the alpha phase, just wanted to whip something up for this new device.

Please offer advice, changes, makes and print settings. I've created all these in tinkercad sooooo... yeah. 

I don't have specific print settings as these are all prototypes and quick prints. I recommend PETG or anything stronger than silk PLA.

My current settings are .6mm nozzle @ .16mm layer height. .3mm prints okay. 

The tolerances are pretty tight, the USB side slides in first at a 45deg angle and then the antenna side pops in.

T096 Mini 1k

• Battery compartment based off of 802550 pouch. (actual battery compartment size is 28x55x9.973)

• M3x20mm and 4 nuts or threaded inserts 

• Two piece case.

Hardware 

M3 nuts and bolts. Just what I had laying around. Made for socket caps but flat countersunk looks pretty good. Might have to trim some of the bolts or do your own. Threaded inserts might be the way to go here. let me know!?!