IR Blaster magnetic holder
TidyAttic
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2025-07-24 16:49:23
0
0
000설명
태그
모델 소스
리뷰(0)
I recently connected the popular Zigbee version of the IR Blaster to my Home Assistant. I decided to mount it on the living room wall, close to a 230V socket, as this suited me best. My first instinct was to simply stick it to the wall with double-sided tape. However, I quickly realised that I wouldn't have access to the button on the back of the device. I also wanted a sleek, flat solution that would not obstruct the signal.
So I designed my own magnetic mount. As well as the printout, you will need eight small 3x3mm, 3mm diameter, cylindrical magnets:
https://www.aliexpress.com/item/1005009535032247.html
https://www.aliexpress.com/item/1005009535032247.html
The magnets fit quite tightly; you can secure them with a drop of superglue if you wish.
You also need to take care of their polarity during assembly.
You also need to take care of their polarity during assembly.
https://www.aliexpress.com/item/1005009535032247.html
태그
모델 소스
원본 링크: 자세히 보기
CC BY