This is the base for an ESP32 S3 Devkit (2 USB-C ports version) enclosure. It's a very simple and basic design that I made as a starting point for a project. There is no lid yet, it's literally just the base you see in the pictures. It has cutouts for the ports and some internal clearance.

Feel free to download it, test the fit with your board, or remix it to add your own cover and features.

Recommended Print Settings:

• Layer height: 0.2 mm

• Walls (Perimeters): 3 walls (this makes the 2mm walls solid and strong)

• Supports: None needed if you print it flat on the build plate.

• Material: PLA or PETG.