Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 142.83x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:

• PLA+ Sunlu Black  Transmission Distance: 0.3

• PLA+ Sunlu Grey  Transmission Distance: 2

• PLA+ Sunlu Red  Transmission Distance: 6

• PLA+ Sunlu Orange  Transmission Distance: 5

• PLA+ Sunlu White  Transmission Distance: 5

• This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #9 (0.8mm) swap to Red
At layer #14 (1.2mm) swap to Orange
At layer #16 (1.36mm) swap to White for the rest.