A Parametric laptop / tablet camera sliding cover.  I designed it because I wanted a camera cover that can be left always on the display, without obstructing the view and that can easily slide to cover and/or uncover the camera when needed but to have a grip strong enough not to accidentally slide off the camera.

 

Please modify the OpenSCAD file as per the reference image provided.

Please note that the provided STL files are for laptop/tablet with a profile of 9 and 7 mm

Do adjust the variables to match the measurements of your laptop

angle the cover back slant angle in degrees, default 9 back_w the width in mm of the cover back, default 0.8 front_w the width in mm of the cover front, default 1 front_H the height in mm of the cover front back_H the height in mm of the cover back lenght the length in mm of the cover itself, default 25 profile the width of the desired laptop profile (I suggest to add a bit of gap to it) top the height in mm of the cover top, default 2

Printer Brand:

Creality

Printer: 

Ender-5 Plus

Rafts:

Doesn't Matter

Supports: 

Doesn't Matter

Resolution:

0.4x0.2

Infill: 

not important

 

 

 

Category: Computer