Modular French cleat-based system to hold your laptop. I have mine mounted to the back of an IKEA ALEX drawer to hold a 13" MBA or 14" MBP, but it can also work on a wall or under a desk.

Print Settings: (decently strong but not crazy strong, here's what I used)

• Layer height: 0.2mm
• Extrusion width: 0.4mm, 0.8mm infill
• Infill: 20%
• Walls: 4
• Top/bottom layers: 5
• No supports
• Material: ABS

BOM:

• Printed parts:
  • 1x: top left
  • 1x: top right
  • 1x: bottom left
  • 1x: bottom right
  • 4x: cleat
• 12x: M3 x 8 BHCS
• 12x: M3 x 4 x 5 heatset inserts (the “Voron ones”)
• 8x: 1/8" or M5 machine screw or wood screw equivalent for mounting