Fidget to use with your extra Topre compatible parts

Required parts: Topre compatible housing, stem & dome
Optional parts: Compatible keycap, Conical Spring

There are different models listed below.  A top and bottom model should be printed for the chosen. After printed dry fit parts, if the fit is too tight lightly file down bottom part.   The 1x  models are a square so notch orientation does not  matter.  There are slots on the bottom part for a flat head screwdriver to assist with separating.

Note: The deep models contain an enclosed cavity space weights can be added if you pause the print (wheel weights worked well for me)

Models

• 1x Thin - 1 key, small and light planning on using for magnets
  • TinkerCAD Model: https://www.tinkercad.com/things/6vmeG2hFp9u-topretester1xthin 
• 1x Deep - 1 key, cavity for weights
  • TinkerCAD Model: https://www.tinkercad.com/things/8lPX6LMOng6-topretester1xdeep 
• 4x Deep - 4 keys, cavity for weights 
  • TinkerCAD Model: https://www.tinkercad.com/things/gG9Wn5JYLmc-topretester4xdeep  

Thanks to Cipulot for making topre plate generator public which helped with the model cuttouts.