A quick little mount for a Raspberry Pi 3A and a Pi camera module. Bolts together at the hinge with a 3mm screw. I had a little thumbwheel nut lying around from another project, so I used that.

The camera mounts on 2 pins and 2 screws. The Pi mounts on 4 pins. I had intended to use a soldering iron to melt the tops of the pins to keep the pi in place, but they seemed more than tight enough as printed

Quick and easy to print, add whatever kind of support you need to mount it if desired. You get about +/- 60 degrees on the camera arm.

Print Settings

Printer:

Self designed Leadscrew printer

Rafts:

Supports:

No

Resolution:

Infill:

20%

Filament:

doesn't matter doesn't matter

black, doesn't matter.

Category: Camera