The Roadrunner
stephanie_martinelli312
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-01-12 09:37:09
0
0
000설명
태그
모델 소스
리뷰(0)
Hi!
Playing with sculptris i made this!!
I call it 'The Roadrunner', it's a guy and his monocycle.
Figure in pictures is printed at 2x scale. Also i made some test at 75% and it can print well.
I used my favourite combo of Fillamentum PLA (Vertigo grey + Iceland Blue + Gold Happens) for the figure in photos.
See Print settings section for more info.
Hope you like it.
Have fun!!!
Print Settings
Printer:
Creality CR 10
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
Doesnt matter
Notes:
Main figure is printed with 0% infill, 3 walls/perimeters, 3 bottoms and 4 top layers.
Supports required, i reoriented the STL as i printed but feel free to find a better position or orientation in your slicer.You may need sanding to put the 'flames' into figure so i recommend using a -0.2 horizontal expansion and use some glue if aome parts are loose
Printing images
200% size, 0.2 layers, 0% infill and a bunch of supports but fantastic results.
태그
모델 소스
원본 링크: 자세히 보기
CC-BY