Dragon Hueforge Bookmark
WENULYN
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2025-11-04 22:49:25
1
0
000설명
태그
모델 소스
리뷰(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 75.02x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #20 (1.68mm) swap to White
At layer #23 (1.92mm) swap to Black
At layer #25 (2.08mm) swap to Red for the rest.
태그
모델 소스
원본 링크: 자세히 보기
CC BY