Ampoule case for safe storage of six ampoules with medicine. The idea is that the lid and the body are connected by two 2 mm rubber bands, made of hat elastic.
It works as a lock and does not allow you to lose the lid and the contents of the case.

On the edges of the ampoule case there are 25x3.5 mm ears for fastening on the MOLLE strap.
The dimensions of the case connected from 2 parts are 89.5 x 75.5 x 17 mm.
I got a weight of 44 grams made of PETG plastic.

Suitable for ampoules of 1 and 2 ml, diameter 11 mm, height up to 70 mm.
The cell size for ampoules is 11.65 mm in diameter, height 71.3 mm
The standard width of the strap used in the MOLLE system is 25 mm.

There are 2 variants of the case. V1 has a hole size of 2.1 mm. And V2 - 2.7 mm. The choice depends on the printing accuracy of your printer. Often small 2 mm holes, when printed, turn out much smaller, about 1-1.5 mm. And you won't be able to push a 2 mm rubber band through there.
The model is made in such a way that it is printed without supports, with the bridge mode turned on.