The stool is made from off the shelf dowels in Ash, the leg joints are modelled for a 38mm leg and a 22mm stretcher. I don't currently own the machinery to accurately cut the joinery so I thought printing might be a nice way to bring everything together. 

Printed to a reasonably loose fit to aide assembly, the stretchers are held with epoxy then a 25mm wood screw in from the back of the joint. 

So far all seems well and strong enough no creaks or cracks in use will edit if it all goes left in the near future 

The top is used was a once rejected stool top from a few years ago, birch plywood end grain in a herringbone pattern.

Fusion file included to have a muck around with please excuse my slap dash modelling 

PLA 

Supports enabled