CFS BUFFER MOUNT
luca_clark
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2025-10-05 01:28:17
0
0
000설명
태그
모델 소스
리뷰(0)
Design Concept
Due to the double-sided tape included in the CFS kit that peels off over time, I came up with this support that can be complemented with that tape. It comes with two M3 12 screws that fit perfectly. Additionally, it has several levels for screwing in the buffer.
Usage
The CFS BUFFER MOUNT is a robust and functional support designed to provide a secure and stable mounting for buffers.
Printing Tips
We recommend using high-strength filament, such as PETG, to ensure durability. Printing at a layer height of 0.2 mm will guarantee good quality, and 15% infill will be adequate to provide stability.
Assembly Instructions
Make sure to adjust it properly in the designated place and firmly secure the position using compatible screws. At the top, use M3 12 screws, and in the buffer area, use M3 4-6 screws.
Due to the double-sided tape included in the CFS kit that peels off over time, I came up with this support that can be complemented with that tape. It comes with two M3 12 screws that fit perfectly. Additionally, it has several levels for screwing in the buffer.
Usage
The CFS BUFFER MOUNT is a robust and functional support designed to provide a secure and stable mounting for buffers.
Printing Tips
We recommend using high-strength filament, such as PETG, to ensure durability. Printing at a layer height of 0.2 mm will guarantee good quality, and 15% infill will be adequate to provide stability.
Assembly Instructions
Make sure to adjust it properly in the designated place and firmly secure the position using compatible screws. At the top, use M3 12 screws, and in the buffer area, use M3 4-6 screws.
태그
모델 소스
원본 링크: 자세히 보기
CC BY