Took Halvi's design of the stacking trays and added some modern server chips a long with 2280 m.2s and some 2.5" drives

The text is just high enough that in bambu labs slicer you can color change at layer 41 and back at layer 44 to have the text pop ( .2mm layer height )

I have spare SSDs in both the 2280 and 2.5 SATA verity. 2.5" HDDs are thicker as well as most U.2 Drives so the tray labeled u.2 is a double high tray

The SP3 Tray is designed for CPUs in their carrier frame Most modern server chips are larger so i did my best to maximize the space in the current tray size without having the original file i did my best. I'm not used to working in the tinker cad site to change files

please message me if you have any issues or requests. i plan on making a tray for ram for the top of my pile for all the extra sticks i have

Printed at only 5% infill took loos parts of my desk. after i went to my parts drawer I had one HDD that wouldn't fit but its an older drive and the sata port sick out further then any other drive i own but should still accommodate any drive that fits into a 24bay 2u chassis

Bambulabs

Bambu X1C

No

Yes

5%

i dont use pla, i only have abs/tpu/nylon so abs was my cheapest option and parts fit fine within current dimensions