Print with a layer height of 0.08mm and a 100% infill rate, and the thickness of the bottom layer is 0.16mm

The model size is 150.67x200mm.
You can use a higher layer height for printing at a minimum depth of less than 0.48mm
The maximum depth is 2.2mm, and the actual depth is 2.3mm.

Consumables used:
Bambu Lab PLA Basic, black. Transmission distance: 0.6
Bambu Lab PLA Matte Dark Brown. Transmission distance: 2
Bambu Lab PLA Basic, Beige. Transmission distance: 8
Bambu Lab PLA Basic, jade white. Transmission distance: 5
Prusament PLA Lipstick Red, Transmission Distance: 3.3
This print uses five unique consumables

Material replacement instructions:
Start with black
Change the color of the seventh layer
Replace the color of the 9th layer
Replace the 10th layer
Replace the color of the 16th layer
Change the color of the 19th layer
Replace the filament on the 23rd layer