With a layer height of 0.08mm and a 100% fill rate, the bottom layer has a height of 0.16mm.

The model size is 133.23x200mm.
You can use a higher layer height for printing at a minimum depth of 0.48 mm or less.
The maximum depth is 2.2mm, and the actual depth is 1.8mm.

Consumables used:
Bambu Lab PLA Basic Black, Transmission Distance: 0.6
Bambu Lab PLA Basic Blue-Grey, Transmission Distance: 3
PolyLite PLA Grey, Transmission Distance: 1
Bambu Lab PLA Basic Ivory White, Transmission Distance: 5
This print uses four unique consumables.

Switching instructions:
Start with black
Switch to blue-gray on the 8th layer
Switch to gray on the 12th layer
Switch to jade white on the 15th layer