Project: bola pueblo.hfp
The filling rate is 100%, the layer thickness is 0.08mm, and the bottom layer is 0.16mm

The model size is 100x100mm.
You can use a higher layer height for printing at a minimum depth of 0.48 mm or less
The maximum depth is 2.2mm, and the actual depth is 2.3mm.

Consumables used:
PLA smartfil black, transmission distance: 0.4
Bambu Lab PLA Basic Blue-Grey, Transmission Distance: 3
Bambu Lab PLA Basic Beige, Transmission Distance: 8
PLA smartfil white, transmission distance: 6
This printer uses four unique consumables

Material replacement instructions:
Start with black
Replace the color of the 11th layer
Replace the color of the 16th layer
Change the color of the 22nd layer