Who still has a fixed office nowadays? When you go from one work site to another, bring all your small items with you. This compact organizer has the following features:

• Work phone storage
• Phone stand/storage cover
• Credit card/money/business card slot
• MicroSD card slots
• Memo/Receipt Book Storage
• Pen/pencil storage with a sliding lid
• Other items used to store USB drives, coins, paper clips, etc.
• A safe lid lock

Attention：I have also provided versions without partitions on the left and right sides of the organizer for customization.

Print
I printed all the parts with a layer thickness of 0.2mm PLA. All parts do not require support. However, it should be noted that the locking parts have 4 built-in supports that can be easily removed. In addition, the right-side parts have a very thin support strip under the locking ridges at the edge, which is also easy to peel off.

Assemble

1. Slide the phone cover into the tongue and groove of the right-side part. It should stay in place on its own, but if it doesn't, you can fix it with a drop of super glue.
2. Place the left and right parts side by side, and the hinge gears will lock into each other. Cut a piece of 1.75mm filament
3. Let one end of the consumables line protrude slightly, and then gently flatten the end with pliers. Next, press the flattened end tightly against the orifice. This should result in a moderate frictional fit.
4. Place the locking parts adjacent to the gears of the left-side parts. Repeat steps 2 and 3 to install the second hinge pin.
5. Insert the clip parts into the grooves on the sides of other storage blocks. They should fit quite snugly. If they're too tight, you can file down the small button on the top of the clips.
6. Clamp the cover plate on the dividing track of the right-side part.

When in use, close the organizer and press it along the latch, so that the hook end clicks into the ridge on the right side. Pull the latch edge backward to reopen it. Note that when closed, the phone holder acts as a cover for other storage boxes, but it can be pulled out and pushed into the tilted groove to be used as a phone holder.