Project: sailor2.hfp
Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model size is 90x180mm.
You can use a higher layer height for printing at a minimum depth of less than 0.48mm
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Printing materials used:
PLA PolyTerra military blue. Transmission distance: 0.3
Bambu Lab PLA Basic Red, Transmission Distance: 5
Bambu Lab PLA Basic Blue, Transmission Distance: 2
Bambu Lab PLA Matte Light Purple. Transmission distance: 2
Bambu Lab PLA Matte Cherry Blossom Pink. Transmission distance: 3
Bambu Lab PLA Basic Beige, Transmission Distance: 8
Bambu Lab PLA Matte Ivory White. Transmission distance: 4
This print uses 7 unique printing materials

Material replacement instructions:
It all started with the military blue outfit
Replace the layer on the 9th floor
Replace the color of the 11th layer
Change the color of the 12th layer
Replace the layer on the 17th floor
Replace the color of the 23rd layer
Replace the filament with ivory white on the 25th layer