Cuadro de un ninja cortando el cuello a un honorable samurai, he usado hueforge para poder imprimir la escena en 3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Stone Blue Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Stone Blue
At layer #8 (0.72mm) swap to Jade White
At layer #15 (1.28mm) swap to Red for the rest.