A wall hook I designed to be used to hold the case for the Mavic Mini on the wall. This is the second iteration of my design, now featuring curves and screw holes.

Printing:

Probably doesn't need a raft but you can add one if you want. You should up the wall thickness to about 4. Rest of the settings are in print settings.

Mine was printed with 20% infill and is plenty strong. MAKE SURE THE BACKPLATE AND SUPPORT BEAM ARE SOLID, NOT HALLOW.

FLSUN QQ-S-PRO (DELTA PRINTER)

Doesn't Matter

No

20%

Just make sure the rear plate (where the screws go in) and the angled support is solid plastic. The rest can be 20% Infill. I used gyroid infill but I printed the previous iteration with grid infill and it held up alright. PLA can be used but I went with ABS this time due to how hot this room gets. PLA started bending, which is what prompted the redesign. It probably wouldn't with the new design but your choice.