This OpenSCAD script will generate a simple fixture to hold several WIMUv3 units while they charge, featuring internal space for cables and possibly a base station or powered USB hub

To do
implement cable runs, finger cutouts, uUSB male plug holes
use actual values for wimu dimensions
use rounded corners
add WIMU numbers?
add holes so status LEDs can be seen?
add tyndall logo?
add option to add mouse-ears to prevent curling during printing

Warning
This is nowhere near complete! but it should still make a nice divided tray or small square object holder

Note
Changes from previous versions:
0.1

• First attempt

You can use this as a parametric recess box/tray maker. To do this:

1. Open .SCAD file and go to the UserVariables* section
2. Set the size of the items to want to put into it to wimu_x & wimu_y
3. set the wimu_tolerance value to something slightly above 0 so you can easily remove/insert the items
4. set the cavity_depth (how deep the recess is), wall_t_ext (how thick the walls around the edges are), wall_t_sep (how thick the walls are between each cell) to suitable values
5. Choose a how many rows and columns you would like using wimu_rows & wimu_cols
6. Recompile, generate .stl and print!