This is a 3D printable add-on hanger designed to organize 3D printing materials inside a clothes wardrobe or cabinet.
The hanger can be mounted inside the wardrobe and used to store spools, tools, or other printing accessories in a clean and space-efficient way.The design focuses on practicality and easy access, helping keep printing materials neatly organized and protected from dust when not in use.

This model is shared for free for personal use. Feel free to modify or adapt it to your needs.

• The illustrated model is the 255 mm version, designed to be printed directly on the P1.
  Please note: if the hanging rod has a diameter greater than 30 mm, the spools will not have enough clearance to be inserted properly.
• The model of the 275 mm , is designed for those who want more clearance between the rod and spools. It can be printed at 2 plates and then attached prefect. Just add a toothpick or some cm of filament at the 2 small holes just to secure the connection.
• The last model of 345 mm, is just to be printed at H2 printers. It has one more hole for 14mm dowel and its super steady. 

For dowels smaller of 1m long you dont need 3rd dowel at the top. Just put the 2 screws each side of the hanger. Mine has 56.5cm lenght and it can fit 8 spools.

Dimensions and printing recommendations can be added or adjusted depending on the available space and materials.