You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Yellow
    At layer #23 (1.92mm) swap to White for the rest.