Project: Ram Hanuman.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x177.72mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.84mm

Filaments Used:
    #000000 PLA+ wol3d Black  Transmission Distance: 0.5
    #f9220c PLA+ wol3d Red  Transmission Distance: 4
    #dfda08 PLA+ wol3d Yellow  Transmission Distance: 8
    #ffffff PLA+ Wol3d White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #9 (0.8mm) swap to Yellow
    At layer #18 (1.52mm) swap to White for the rest.