After seeing you liked the Hornet keychain from Hollow Knight, I bring a new second design in a chibi version, and with the new Silksong game, I hope you like it a lot.

1. I used the following characteristics:
2. 3 mm in height with a 0.2mm layer height, you can use 2.4mm in height if you want.
3. 10% infill
4. 4 top and bottom layers
5. I am adding a file already ready for the Bambu Lab A1
6. I recommend scaling the stl or 3mf to 7cm on the longest side.
7. I reduced the print speed by 30% from the base speed in the slicer if you have another Bambu Lab model.

I recommend flipping the design so that the colored part is smooth and has a better finish if you are not using the file for the Bambu Lab A1.

For the ring, I recommend one with a 10mm diameter.

I hope you like the design and can show support by liking and sharing examples of your prints in the comments, that would help me bring more designs.

If you have any questions or suggestions, I will gladly read them in the comments